- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: 3D printer - Flashforge Adventurer 4 Pro
A newer version of the Adventurer 4 3D printer manufactured by Flashforge. Improvements have been introduced that have a significant impact on print quality and printer performance. The device can print at a speed of up to 300 mm/s . This is a significant improvement compared to the previous model, which operates at speeds of up to 150 mm/s. The manufacturer also added an additional fan to the extruder housing, which increases the efficiency of the cooling system. The built-in camera has also been improved so that you can observe and record your prints in even better resolution. Adventurer 4 Pro offers a closed working area of 220 x 200 x 250 mm , and its entire structure has dimensions of 500 x 470 x 540 mm. The set includes a flexible work platform with a PEI coating and two original Flashforge nozzles - with holes of 0.4 mm and 0.6 mm in diameter.
3D printer - Flashforge Adventurer 4 Pro.
Adventurer 4 vs Adventurer 4 Pro.
Auto-leveling system
Flashforge Adventurer 4 Pro is equipped with a 30-point intelligent auto-leveling sensor that can adjust the distance between the nozzle and the build platform accordingly. Automatic calibration also helps ensure high quality first layer.
Increased speed
The Adventurer 4 Pro printer can print at speeds of up to 300 mm/s, which is a significant improvement over its predecessor which can print at speeds of up to 150 mm/s. This reduces printing time by approximately 50% .
Improved cooling system
Another function optimized by the manufacturer is the printer's cooling system. Adventurer 4 Pro has an additional fan in the extruder housing, which increases the air flow rate , thereby improving cooling efficiency.
HEPA13 air filter
Pollen released from some filaments may have a negative impact on the human body. Fortunately, the printer is equipped with a class 13 HEPA filter, which limits the passage of vapors and microparticles outside the working area of the device and creates a user-friendly environment .
HEPA13 air filter.
Automatic filament feeding system.
Automatic filament feeding
Save time and effort thanks to the automatic filament loading and unloading system, which significantly speeds up and makes the printing process more enjoyable . Just one click of your finger and the printer will do everything for you!
Silent printing
Adventurer 4 Pro is equipped with a silent motherboard . According to the manufacturer, the device should not produce sounds louder than 50 dB during printing. The quiet operation of the printer provides the user with comfort and does not disturb his peace of mind. Thanks to this, Adventurer 4 Pro can also be used at night.
Flexible PEI work platform
The printer will be delivered to you with a worktable cover made of polyetherimide (PEI) . The plate allows you to easily remove the finished print in a few seconds, without the need to use tools. At the same time, the platform ensures good grip and no deformation of the models.
Original Flashforge nozzles
The set also includes original nozzles from Flashforge . One of them has a hole with a diameter of 0.4 mm and can print at temperatures up to 240°C. The nozzle allows the printer to operate at high speeds without losing print quality. In addition, the set includes a second nozzle - hardened with a hole of 0.6 mm in diameter, with a maximum operating temperature of 265°C. It works with filaments with the addition of carbon fiber.
Original modular nozzle from Flashforge.
Flashforge Adventurer 4 Pro 3D printer specifications
| TECHNICAL SPECIFICATIONS | |
|---|---|
| Printing method: | FDM |
| Print Size: | 220 x 200 x 250 mm |
| Nozzle temperature: | up to 265°C |
| Table temperature: | up to 110°C |
| Nozzle Diameter: | standard: 0.4 mm |
| Print Thickness: | from 0.1 mm to 0.4 mm |
| Print speed: | up to 300 mm/s |
| Supported filament: | ABS, PLA, PETG, PLA-CF, PETG-CF |
| Filament diameter: | 1.75mm |
| Display: | touch, 4.3" |
| Software: | FlashPrint, Cura, Slic3r |
| Operating mode: | USB drive, WiFi, Ethernet |
| File format: | STL, OBJ, 3MF, FPP, BMP, PNG, JPG, JPEG |
| Output file format: | GX, G File |
| Supply voltage: | from 100 V to 240 V AC / 24 V DC |
| Rated power: | 320 W |
| Printer dimensions: | 500 x 470 x 540 mm |
Useful links |
