- EOL
|
Attention! The product has been discontinued. Check other products incategory. |
Description
Shield suitable with minicomputer Raspberry Pi, version 2 and B+, extending the capabilities of the device. It has active USB hub with three slots, connectors of audio and video, including Jack SPDIF and VGA. Thanks tothe wi-fi module with added antenna, the user can connect to the wireless network. Built-inreal time clockwith battery allows you to measure the time, even during the temporary absence of power.
Key features
- Built-in wi-fi module
- Active USB-HUB with 3 ports
- Built-in power system with a voltage regulator which can power the Raspberry Pi
- Connectors of audio / video, including SPDIF, Jack and VGA
- Real-time clock with battery
- The IR receiver of 38 kHz
- Led-out GPIO connectors and slot for the camera
Shield has led-out all the 40 pins of GPIOof the Raspberry Pi, as well as a slot for connecting a special camera. In this way, the user does not lose the possibility of connecting another shields and electronic devices.
Connection
Board has connectors that are compatible withRaspberry Pi, version 2 and B+, as well as screws that provide a stable mounting of the extension. The manufacturer provides a dedicated operating system that supports the expansion.
| Detailed information can be found inthe user guide |
Board should be applied on the GPIO pins of the Raspberry Pi and connected to the HDMI and USB using included adapters.
The sale includes the extension module,the Raspberry Pican be purchased separately.
Specification
- Supply voltage: 6 V to 21 V
- Built-in voltage regulator of 5 V to power the Raspberry Pi
- Outputs:
- VGA supporting the resolution of 1600x1200 pixels and 1080p with 10-bit analog-digital converter
- Audio jack of 3.5 mm
- SPDIF
- Microphone input 3.5 mm Jack
- Wi-fi module IEEE 802.11 b/g/n with added external antenna
- IR sensor of 38kHz
- Built-in active USB hub with 3 ports
- RTC - based on the DS3231SN module and battery CR2032
- 8-channel Darlington system (ULN2803), it allows you to control devices that require more current
- Slot to connect the Raspberry Pi camera
- Connecting to the Raspberry via GPIO, it requires no soldering
- Led-out 40-pin GPIO for future use
- The shield works with Raspberry Pi 2 and B+
- Dimensions of 85 x 56 mm - compatible with Raspberry Pi
Included
- Shield for Raspberry Pi X200
- Adapter for connecting HDMI
- Adapter for USB connection
- Wi-fi antenna
- Nylon spacers and screws
|
Attention! When power is connected to the board X200, you should not power Raspberry Pi seperately with built-in microUSB connector, as this may cause damage to the micro-computer. |
Useful links |
