- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Graphic LCD TFT display with a diagonal of 1.54" and a resolution of 240 x 240 pixels with 16-bit color. It works with a voltage of 3.3 V and 5V, communicates through the SPI bus. It has a wide viewing angle and an EYESPI connector for an 18-wire tape. In addition, there is a slot for microSD memory cards on the board.
The outputs are holes for the supplied goldpin connectors - 2.54 mm raster (for self soldering). They allow the connection of the display via wire or plug attached to the contact plate.
Thanks to the integrated voltage converter, the system works with logic 3.3 V and 5 V. Mounted connector enables the delivery of graphic files on the microSD card in FAT16/FAT32.
|
The product is compatible with Arduino On the Adafruit website you can findthe user manualalong witha library for Arduino. |
Specification
- Supply voltage: from 3.3 V to 5.0 V
- The operating voltage of the conclusions: from 3.3 V to 5.0 V
- Driver:ST7789(documentation)
- Wide viewing angle
- Screen size: 1.54 inch
- Resolution: 240 x 240 px
- Color depth: 16-bit
- Illumination white LEDs with the ability to control brightness using the PWM signal
- Communications: SPI
- The microSD slot
- EYESPI connector
- Built-in slot for microSD memory cards
- Board sizes: 42 x 41 x 6 mm
Useful links |
