- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Miniature module withSTM32microcontroller withARM Cortex M4F 64 MHz, 256 kB RAM, 1 MB Flash memory. It has a built-in module nRF52840 supporting the Bluetooth and20 GPIO pins that operate with a voltage of 3.3 V. Programming is done using the cloud www.particle.io. The board can be powered viathe microUSB portorwith a lipo battery connectorJST 2-pin pitch 2.0 mm.
|
The device works with the software in the cloudparticles.io. Detailed information about the programming and the maintenance of wi-fi is available inthe user's guide. |
Communication
Thanks to the installed modulenRF52840the user can communicate via Bluetoothin a simple way. The system is compatible with the standard802.15.4-2006 and Bluetooth 5. It also has a protection module and encryption.
|
Attention! Particle Mesh network is no longer available, the manufacturer provides instructionon how to continue using the device without a Mesh network. |
Programming
The device works with the software in the cloudparticles.io. Detailed information about programming and services is available inthe documentation.
|
Module's inputs work with voltage 3.3 V. |
The distribution of elements on the Board Xenon.
Inputs
On the board there are interfaces such as UART, I2C, SPI. The board has soldered goldpinconnectors with raster of 2.54 mm, which allow you to connect it directly tothe breadboard.
|
A detailed description of the inputs is in thedocumentationon the manufacturer's website. |
Specification
- Supply voltage VIN: 4.5 V to 5 V
- Voltage of a USB power: 5.0 V
- Lipol voltage: 3,7 V
- System nRF52840:
- Microcontroller: ARM Cortex M4F 32-bit
- Clock Frequency: 64 MHz
- RAM: 256 KB
- Flash memory: 1 MB
- Standard: IEEE 802.15.4-2006 / 250 kb/s
- Bluetooth 5: 2 Mbps, 1 Mbps, 500 kbps, 125 kb/s
- Supports DSP instructions
- Cryptographic module ARM TrustZone CryptoCell-310
- Transmitter power: up to +8 dBm
- NFC Tag-A
- Additional Flash memory SPI: 2 MB
- Programmable via microUSB
- Interfaces: 20x GPIO:
- 6 x analog input
- 8 x PWM
- UART
- SPI
- I2C
- Built-in battery charger with a lipo: JST connector 2-pin, pitch 2.0 mm
- LED RGB
- Reset button and Mode
- Built-in PCB antenna and a connector.FL
- All output: 28
- Inputs Xenon working voltage 3.3 V
- Dimensions: 51 x 23 x 15
- Weight: 7.3 g
Useful links |
