- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Kit enables the creationof IoT projectsbased on the board Boron Particles allowing for 2G / 3G, Mesh andBluetooth communication. Partcile Boron with microcontroller nRF52 supplied with a core- ARM Cortex M4F 64 MHz, 256 kB RAM, 1 MB Flash memory.Built-in modulenRF52840supportsthe Mesh network andBluetoothand20 GPIO pins, operating with a voltageof 3.3 V. An additional chipu-blox SARA U2101 provides 2 G / 3G connectivity. Programming is done via the cloud www.particle.io. The board can be powered viathe microUSB portorwith a lipo battery connectorJST 2-pin raster 2.0 mm.
The contents of the Particles Boron 2G/3G KIT.
|
The device works with the software in the cloudparticles.io. Detailed information about the programming and maintenance of wi-fi is available inthe user's guide. |
Communication
Thanks to the installed module nRF52840 the user can to communicate with the Mesh network and via Bluetooth in a simple way, additional coprocessor u-blox Sara U201 allows you to communicate with 2G / 3G. The system is compatible with the standard 802.15.4-2006, Bluetooth 5 and LTE CAT M1. It also has a protection module and encryption. The kit includes an external wi-fi antenna LTE u.FL.
Programming
The device works with the software in the cloudparticles.io. Detailed information about programming and services available inthe documentation.
|
Module's inputs work with voltage 3.3 V. |
The distribution of elements on the Boron Board.
Inputs
On the board there are interfaces such as UART, I2C, SPI. The board has soldered goldpin connectors with a raster of 2.54 mm, which allows you to connect it directly to the breaboard.
|
A detailed description of the inputs is in thedocumentationon the manufacturer's website. |
Specification
- Supply voltage VIN: 4.5 V to 5 V
- Voltage of a USB power: 5.0 V
- Lipol voltage: 3,7 V
- System nRF52840:
- Microcontroller: ARM Cortex M4F 32-bit
- Clock Frequency: 64 MHz
- RAM: 256 KB
- Flash memory: 1 MB
- Standard: IEEE 802.15.4-2006 / 250 kb/s
- Bluetooth 5: 2 Mbps, 1 Mbps, 500 kbps, 125 kb/s
- Supports DSP instructions
- Cryptographic module ARM TrustZone CryptoCell-310
- Transmitter power: up to +8 dBm
- NFC Tag-A
- System u-blox SARA U201:
- 2G / 3G
- HSPA / GSM and SIM support
- 3GPP Release 7
- Strip: 800 / 850 / 900 / 1900 / 2100 MHz
- Additional memory, SPI Flash: 4 MB
- Programmable via microUSB
- Interfaces: 20x GPIO:
- 6 x analog input
- 8 x PWM
- UART
- SPI
- I2C
- Built-in lipo battery charger: JST connector 2-pin, raster 2.0 mm
- LED RGB
- Reset and Mode button
- Built-in PCB antenna and connectors u.FL
- All output: 28
- Inputs Xenon working voltage 3.3 V
- Dimensions: 51 x 23 x 15
- Weight: 10 g
Set includes
- Module Particle Boron
- Breadboard
- Red LED
- Photodiode
- 2x resistor
- Battery Li-Pol 3.7 V / 1500 mAh
- Antenna LTE u.FL
- MicroUSB cable
Useful links |
