- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Power supply for LED strips and strips MW Power MPL-06-12 12 V / 0.5 A / 6 W
TheMW Power Switch Mode Power MPL-06-12 is a device designed to supply electricity forLED lighting.The output of the power supply is12 VDC and its current capacity is0.5 A, which enables the connection of LED lighting with a maximum power consumption of6 W. The built-in electronic protection system provides effective protection of the PSU and lighting by switching off the power supply in the event of a short-circuit or overload in the secondary circuit, and when the permissible operating temperature is exceeded. After removing the cause of tripping the protections, the PSU shall return to normal operation mode.
Power supply for strips and LED strips MW Power MPL-06-12 12 V / 0,5 A / 6 W.
Technical data of the power supply are LED strips and strips
-
Power supply design: impulse
-
Output voltage: 12 V DC
-
Current capacity: 0,5 A
-
Maximum output power: 6 W
-
Maximum output voltage deviation: ± 5%
-
Mains voltage range: 220 V AC to 240 V AC
-
Mains current consumption: 75 mA
-
Mains voltage frequency range: 50 Hz to 60 Hz
-
Efficiency: 78%
-
Power at rest: < 0,3 W
-
Short-circuit protection: Yes
-
Overload protection: Yes
-
Time to return to normal mode after the interference is cleared: 1 s
-
Degree of protection: IP20
-
Working environment temperature range:-10°Cup to +45°C
-
Dimensions: 52 mm x 21 mm x 43,5 mm
-
Weight: 32 g
