- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: 3D Printer - Artillery Sidewinder-X2
3D printer from Artillery. It uses FFF incremental technology to form 3D models. The device features automatic heating table leveling, dual Z-axis and a powerful motherboard with silent stepper motor drivers. The Sidewinder-X2 uses a Direct Drive extruder to transport the filament. The working area of the 3D printer is 300 x 300 x 400 mm. The dimensions of the device's structural metal frame are: 550 x 405 x 640 mm.
Artillery Sidewinder-X2 - first commissioning.
Aesthetic 3D printer cable organization.
Aesthetic cabling
One of the distinguishing features of the Artillery Sidewinder-X2 is the practical organization of the printer's cables. An integrated wiring system was used here. The wires are arranged in bundles that are easy to connect or disconnect when maintenance is required. This is convenient and safe. It also enhances the aesthetic value of the 3D printer.
Titan Direct Drive Extruder
Artillery Sidewinder-X2 uses Direct Drive mechanism with branded Titan extruder to transport the filament. This solution involves mounting the extruder on the print head. Here, the filament is pushed directly into the hotend, which works especially well when working with demanding, flexible filaments. The Sidewinder-X2 uses Volcano nozzles.
Titan Direct Drive in the Artillery Sidewinder-X2.
The motherboardin the Artillery Sidewinder-X2.
Powerful motherboard
The Artillery Sidewinder-X2 is equipped with a 32-bit motherboard. The chip ensures stable operation and high computing power. It also allows for easy expansion.
The designers of the device have also taken care of a high comfort of users' work. Thanks to silent stepper motor drivers, the printer does not generate unpleasant noise even under heavy load.
Tempered glass and fast heating hotbed
In the Artillery Sidewinder-X2 model, the manufacturer used a heating table, the surface of which is high-quality tempered glass. This element provides increased adhesion of the first layers of 3D printing. At the same time, the finished models can be easily peeled off after work without damaging them. Heating up the hotbed to 110°C takes only 2 minutes.
Hotbedsurface made of tempered glass.
Dimensions of 3D printer workspace.
Large workspace
Artillery Sidewinder-X2 offers a workspace with dimensions of 300 x 300 x 400 mm. This is a space that allows you to freely form even large 3D models without having to split them into smaller pieces. This allows the user to develop their creativity unhindered.
Dual Z-axis
The Artillery Sidewinder-X2 uses a synchronized dual Z-axis. This system is based on the use of two trapezoidal screws with stepper motors, which are responsible for movement in the Z-axis. This solution ensures stable movement of the print head even at higher speeds. In addition, the manufacturer has modified the nuts of the trapezoidal screws, increasing the precision of the printer.
Mounting of trapezoidal screws in Artillery Sidewinder-X2.
Automatic table leveling.
Intelligent automatic leveling system
The automatic leveling system implemented in the Artillery Sidewinder-X2 makes it easy to prepare the machine for precise work. The built-in sensor measures the distance to the table in several places using a dynamic compensation process.
Additional features of the Artillery Sidewinder-X2
- Sensor for interrupted / missing print material
- Print resume function after power failure
- High quality adaptive power supply for stable power supply
- User-friendly touch screen display with 45° tilt angle
Leveling and filament sensors on the Sidewinder-X2.
Artillery Sidewinder-X2 3D Printer Specifications
| Technical Specification | |
|---|---|
| Printing method: | FFF |
| Power supply: | 100 V to 240 V |
| Power: | 700 W |
| Nozzle diameter: | standard: 0.4 mm |
| Supported Filament: | PLA, ABS, flexible filaments, Wood, PVA, HIPS |
| Filament diameter: | 1.75 mm |
| Extruder type: | Titan Direct Drive |
| Nozzle type: | Volcano |
| Print thickness: | 0.1 to 0.35 mm |
| XY axis positioning precision: | 0.05 mm |
| Z-axis positioning precision: | 0.1 mm |
| Printing speed: | 60 to 150 mm/s |
| Display: | touchscreen, color |
| Operating mode: | USB, SD card |
| Operating noise: | less than 70 dB |
| Print size: | 300 x 300 x 400 mm |
| Nozzle temperature: | 180°C to 240°C |
| Table temperature: | 130°C |
| Printer dimensions: | 550 x 405 x 640 mm (without filament stand) |
| Printer dimensions: | 550 x 405 x 870 mm (with filament stand installed) |
| Weight: | 12.9 kg |
