- EOL
Attention! The product has been discontinued. Check other products in category. |
Product description: Metro Mini 328 V2 - Arduino compatible - 5 V / 16 MHz - STEMMA QT / Qwiic - Adafruit 5597
Metro Mini 328 V2 is an upgraded version of Adafruit's Metro Mini 328 board. It is fully compatible with the Arduino Uno, it has a built-in ATmega328 microcontroller clocked at 16 MHz, with 32 KB of Flash memory and 2 KB of RAM memory . Metro Mini 328 V2 is equipped with 20 GPIO pins - digital inputs / outputs, 6 analog inputs, 6 PWM channels and popular communication interfaces - UART , SPI and I2C . In addition, the board has a STEMMA QT / Qwiic connector, which facilitates the prototyping process, and a USB type C connector for powering and programming the system.
Metro Mini 328 V2 - Arduino compatible - 5 V / 16 MHz - STEMMA QT / Qwiic - Adafruit 5597.
Special features of the tile
- Compatible with Arduino Uno, which means that it can be programmed via the Arduino IDE environment using public libraries
- Equipped with the popular ATmega328 microcontroller with 32 KB of Flash memory and 2 KB of RAM memory
- Programming and debugging takes place via the USB type C connector - the original SiLabs CP2102N
- It has a built-in 5 V stabilizer with 150 mA output
Kit contents
- Metro Mini 328 V2 - Arduino compatible - 5 V / 16 MHz - STEMMA QT / Qwiic - 1 piece
- Goldpin strip 1x16 pin - aster 2.54 mm - 2 pieces
Specification of Metro Mini 328 V2
- Supply voltage: 5V to 16V (9V recommended)
- Working voltage of the 5 V pins (the possibility of changing to 3.3 V by cutting the jumper on the back of the board)
- Programming interface: USB type C - SiLabs CP2102N
- Microcontroller: ATmega328 with Optiboot (Uno) bootloader
- Maximum clock frequency: 16 MHz
- SRAM memory: 2 kB
- Flash memory: 32 KB (0.5 KB reserved for bootloader)
- I / O ports: 20 (2 reserved for programming)
- PWM outputs: 6
- Number of analog inputs: 6 (channels of A / C converter)
- Serial interfaces: UART, SPI, I2C
- Status indication: four LEDs
- Built-in 5 V stabilizer with a capacity of 150 mA
- Built-in stabilizer 3.3 V with a capacity of 50 mA
- Conclusions:
- solder pads (goldpin strip included)
- STEMMA QT / Qwiic connector
- Dimensions: 44.3 x 17.8 x 4.9 mm
- Weight: 3.4 g
Useful links |