- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Device for washing and drying prints - Creality UW-02
Crealitydevice designed for final processing of 3D prints made of resin. Allowswashingof large 3D models with a maximum size of240 x 160 x 200 mmanddrying objects with a diameter of 200 mm. The UW-02 cures prints with UV light of385 nm and 405 nmwavelengths, using a rotating platform. The washer is characterised by high ease of use.
Device for washing and drying printouts - Creality UW-02.
Two working modes: washing and drying 3D models.
Two modes
Creality UW-02 offers two modes:washing and drying finished models. Prints made of resin require additional processing to achieve the right properties. Washing allows you to remove the remaining uncured resin. Drying allows final curing of finished models using UV light.
360° Print Curing
The device for the final curing of prints usesa rotating platform and two rows of LEDsemitting light with wavelengths of 385 nm and 405 nm. Rotating objects are cured on their entire surface. There is no "dead zone" phenomenon.
Rotating platform and two rows of LEDs that emit UV light.
System of LED diodes curing the printout.
Two rows of UV LEDs
Two rows of UV light emitting LEDs enable curingof large surfaces. They provide uniform and more focused illumination of 3D models. The objects are dried more efficiently and comprehensively, which has a positive effect on their final quality.
Two print cleaning methods
Creality UW-02 allows you to wash prints in two ways. The user can place the modeldirectly into a dedicated metal basket. Alternatively, to remove unnecessary fragments of non-dried resin, it is possible to place the whole platform, on which the print was formed, on a special holder. The printout is then washedoff without the need to detach it from the workingplatform.
Creality UW-02 has a special holder for mounting the workingplatform.
Fast and efficient cleaning of 3D prints made of resin.
More efficient cleaning
The large, magnetic fan blades used in the Creality UW-02 allow for fast spinning, which allows forefficient removal of excess resinfrom the surface of the 3D model. The whole process does not take long, nor does it damage the print.
Cleaning large surface prints
The device allows you to place prints with a maximum size of240 x 160 x 200 mm ina dedicated basket for cleaning. This size is suitable for models formed on SLA printers with a maximum diagonal of 10.1'' projector.
Dimensions of dedicated print cleaning cage.
Device control panel.
Speed and time adjustment
Creality UW-02 allows to choose one ofthreeworking speeds: slow, medium and fast. Working time can also be adjusted:2, 5, 10, 15, 20, or 30 minutes. The device is controlled with convenient buttons located on the front panel. The UW-02 has a built-in simple display, which informs about the time of activity of a particular mode.
UV protection cover
The device is equipped with a special cover effectively protecting it against UV radiation escaping outside the working area. The UV blocking index isover 99%for both wavelengths (385 nm and 405 nm).
Effective protection against UV radiation.
Specifications of device for washing and drying printouts - Creality UW-02
| Technical specification | |
|---|---|
| Supply voltage: | 100 V to 240 V (AC - mains) |
| Operating voltage: | 24 V / 2.5 A (DC) |
| Power: | 60 W |
| Housing type: | closed |
| Operating modes: | washing / drying of 3D prints |
| Operating speeds: | low, medium, fast |
| Selectable working time: | 2, 5, 10, 15, 20, 30 minutes |
| UV light wavelengths: | 385 nm and 405 nm |
| Material of the drying platform: | stainless steel |
| Material of washing basket: | PP |
| Working area of drying function: | objects with a diameter of up to 200 mm |
| Working area of washing function: | 240 x 160 x 200 mm |
| Maximum model weight: | 2.5 kg |
| Product dimensions: | 325 x 295 x 485 mm |
| Weight: | 8 kg |
Useful links |
