Miernik UNI-T UT20B
Miernik UNI-T UT20B
Miernik UNI-T UT20B - zdjęcie 1
Miernik UNI-T UT20B - zdjęcie 2

Universal multimeter UNI-T UT20B

Index: UPM-00989 EAN: 5901436740841

Portable multimeter made by UNIT-T company. It allows for measurement of DC voltage, AC current and resistance up to 2 MOhm. In addition, the device is equipped with a battery tester, low battery indicator and 50 Hz signal generator.

Product was replaced by other
Universal meter Rebel RB-33B
Regular price €6.95 Price €6.95

Attention!

The product has been discontinued. Check others products in category.

Description

Small, portable multimeter made by UNIT-T company. It allows for measurement of DC voltage, AC current and resistance up to 2 MOhm. In addition, the device is equipped with a battery tester, low battery indicator and 50 Hz signal generator. The device is powered by battery 12 V, which is also included. The whole set is enclosed in a protected, original blisterze.

 

Uniwersalny miernik UNI-T UT20B.

UNI-T UT20B.

Includes:

  • Test leads included
  • Battery
  • Instruction: in English and Polish
  • Warranty: 24 months

 

Specification

Option Range
DC voltage 200 mV / 2 V / 20 V / 200 V / 300 V
AC voltage 200 V / 300 V
DC 2000 µa / 20 mA / 200 mA
AC not
Resistance 200 Ohm / 2 kOhm / 20 kOhm / 200 kOhm / 2 MOhm
Capacity not
Inductance not
Frequency not
Temperature not
Automatic range selection not
Standby mode not
Audio sound not
Transistor tester not
Diode tester not
Battery tester Yes, 1.5 V, 9 V
Function Data Hold not
Battery indicator so
Backlight not
Display LCD 1999 (31 x 13 mm)
Dimensions 95 x 52 x 26 mm
Power supply battery A23 12V (included)
Weight 125 g

 

 

Meter - DC voltage yes
Meter - Diode tester no
Meter - Battery tester yes
Meter - Frequency no
Meter - AC voltage yes
Meter - AC current no
Meter - Capacitance no
Meter - Auto Range no
Meter - DC current yes
Meter - Resistance yes
Meter - Transistor tester no
Meter - sound no
Meter - Inductance no
Meter - Backlight no
Meter - Temperature no
Meter - Data Hold no

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

Breadboard - 830 holes

Breadboard is used for creating and testing electronic circuits without the need for soldering. Version with 830 holes, the size of 165 x 53 mm. Stripes (blue and red) help in...
Index: PLY-00055
Index: PLY-00055
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.79 Price €1.79

STM32F407G-DISC1 - Discovery - STM32F4DISCOVERY

The commissioning kit is built on the basis of STM32F407VGT6 microcontroller, it allows you to get to know the systems equipped with the latest Cortex-M4F core from ARM...
Index: DIS-00445
Index: DIS-00445
In stock, shipping 24 hours!
(Check quantity)
Regular price €24.35 Price €24.35

Soldering station WEP 936A 75W

Soldering station 936A WEP using soldering tips, with a total capacity of 75 watts with adjustable temperature from 200 °C to 480 °C.  The device has a soldering iron with...
Index: LUT-00905
Index: LUT-00905
Czas oczekiwania: ok. 10-30 dni
Regular price €29.07 Price €29.07

Universal plate PDU22 - THT

Plate for the installation of THT threaded elements. It has 663 holes, its external dimensions are: 52 x 102 mm.
Index: PLY-00937
Index: PLY-00937
Unavailable
Regular price €2.21 Price €2.21

Customers who bought this product also bought:

Servo TowerPro SG-90 - micro - 180 degrees

Servo type micro. Speed: 0.1 sec/60 ° . Torque: 1.8 kg*cm Dimensions: 22 x 12 x 27 mm. Weight: 9 g.
Index: MOT-00484
Index: MOT-00484
Czas oczekiwania: ok. 10-30 dni
Regular price €1.79 Price €1.79

Resistance soldering iron 30W

Resistance soldering iron 30 W supplied by a mains voltage of 230 V. It is ideal for soldering or desoldering small electronic components.
Index: LUT-00672
Index: LUT-00672
Czas oczekiwania: ok. 10-30 dni
Regular price €4.63 Price €4.63

Soldering tin in tube 16g / 1,00mm

Tin in a tube with a diameter of 1.00 mm and a weight of 16 grams.
Index: NSZ-00309
Index: NSZ-00309
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.14 Price €1.14

DC motor - Micromotors HL149 with 21:1 transmission

HL149 DC motor with 21:1 geared motor. 0.075 Nm (0.76 kgcm) torque. Speed 160 rpm. Nominal supply voltage 6 V.
Index: MOT-00515
Index: MOT-00515
Unavailable
Regular price €3.70 Price €3.70

Universal plate PDU21 - THT

Plate for the installation of THT threaded elements. It has 240 holes, its external dimensions are 51 x 46 mm.
Index: PLY-00175
Index: PLY-00175
Unavailable
Regular price €0.69 Price €0.69

L293D - two-channel 36V / 0,6A motor driver - 5pcs

Two-channel motor controller. Supply voltage up to 36 V . Average current per channel 600 mA (momentary up to 1.2 A). Enclosure: DIP 16 (scrolling). Set contains 5 pieces of...
Index: UCC-00176
Index: UCC-00176
Available, 24h shipping!
(Check quantity)
Regular price €2.07 Price €2.07

Stand for DIP16 - 5pcs.

Stand for chip DIP 16 pin. Price for 5 pieces.
Index: UCC-00185
Index: UCC-00185
Czas oczekiwania: ok. 10-30 dni
Regular price €0.35 Price €0.35

Electrolytic capacitor 22uF/50V 5x11mm 105C THT - 10pcs.

Through hole electrolytic capacitor of 22 uF / 50 V. Pins' pitch: 2 mm. Size: Ø5 x 11 mm. Price is for 10 pieces.
Index: PAS-00212
Index: PAS-00212
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.35 Price €0.35

Electrolytic capacitor 10uF/50V 5x11mm 105C THT - 10pcs

Through hole electrolytic capacitor of 10 uF / 50 V. Pins' pitch: 2 mm. Size: Ø5 x 11 mm. Price is for 10 pieces.
Index: PAS-00211
Index: PAS-00211
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.23 Price €0.23

Ceramic condenser 100nF / 50V THT - 10 pcs.

Through hole ceramic capacitor of 100 NF / 50 V. The price for 10 pieces.
Index: PAS-00210
Index: PAS-00210
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.23 Price €0.23

Linear voltage regulator 5V L7805ABV - THT TO220

Stabilizer used to supply logic systems supplied with 5 V. The maximum output current is 1 A.
Index: UCC-00081
Index: UCC-00081
Waiting time: about 10-30 days
Regular price €0.26 Price €0.26

Male Headers 1x40 raster 2,54mm straight

Goldpin male 1x40 strap, pitch is 2.54 mm.
Index: KAB-00192
Index: KAB-00192
Unavailable
Regular price €0.16 Price €0.16

Products from the same category

Smart controller Reprap 3D Ramps 1.4 LCD 2004

Control panel with LCD display and SD card slot for 3D RepRap printers. Also included are cables and adapter for connection to the Ramps 1.4 controller.
Index: MOD-02661
Index: MOD-02661
Unavailable
Regular price €19.77 Price €19.77

Carbon and monoxide sensor KIDDE 7DCO

A sensor that recognizes the concentration of carbon monoxide (CO) in the air. Powered by three AA batteries. Used for warning  with an audio signal before  harmful CO...
Index: HUR-10616
Index: HUR-10616
Unavailable
Regular price €23.72 Price €23.72

Rotary switch 3-position

Rotary switch, 3-state for the case, equipped with 6 contacts. The pitch is 5 mm. The total height is 37 mm.
Index: UCC-03737
Index: UCC-03737
Unavailable
Regular price €4.16 Price €4.16

RPi Plus Breakout Kit - prototype board for Raspberry Pi 4B/3B+/3B/2B

The board allows to connect the Raspberry to the prototype boards or breadboards. It is connected directly to the GPIO pins of minicomputer. All pins are marked to facilitate...
Index: ABE-11705
Index: ABE-11705
Unavailable
Regular price €5.23 Price €5.23

Case for Raspberry Pi Model 3B+/3B/2B Simple - black

A simple, plastic black case for  minicomputer Raspberry Pi, version 3B+, 3B, 2B and 1B+ with external dimensions of 90 x 70 x 25 mm .
Index: RPI-03854
Index: RPI-03854
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.79 Price €1.79

Little Bits Code Kit Class pack - LittleBits starter kit for 30 students

LittleBits are electronic learning sets that develop creativity and logical thinking skills. They do not require cables, soldering or programming. They consist of blocks...
Index: ROB-12230
Index: ROB-12230
Unavailable
Regular price €3,488.14 Price €3,488.14

Goldpin plug 1x40 straight 2.54mm raster - yellow

1x40 male goldpin plug, pitch of 2.54 mm. Color yellow.
Index: KAB-04167
Index: KAB-04167
Unavailable
Regular price €0.19 Price €0.19

Little Bits STEAM Education Class Pack - LittleBits starter kit for 30 students

LittleBits are electronic learning sets that develop creativity and logical thinking skills. They do not require cables, soldering or programming. They consist of blocks...
Index: ROB-12238
Index: ROB-12238
Unavailable
Regular price €3,488.14 Price €3,488.14

Dinosaur Roboraptor Giant - 80cm

A remote-controlled robot dinosaur. It is able to move its legs, tail and turn its head, just like a real prehistoric creature. It has 40 different functions, e.g. recognition...
Index: ROB-04895
Index: ROB-04895
Unavailable
Regular price €76.51 Price €76.51

Artec PC STEM light programming - educational kit

Programming kit for LED light. The kit includes electronic components pre-assembled on the main board. It is designed to teach the basics of electronics and programming....
Index: ORJ-13120
Index: ORJ-13120
Unavailable
Regular price €34.86 Price €34.86

Humanoid robot - Roboactor - 36cm

A remote-controlled humanoid robot. It has many features, i.e. walking in any direction, twisting, running, punching, throwing objects and dancing. The robot can also emit...
Index: ROB-04897
Index: ROB-04897
Unavailable
Regular price €60.23 Price €60.23

3D printer - Creality CR-3040S

3D printer made by Creality is designed to print elements with a size of 400 x 300 x 300 mm . The printer size is 660 x 470 x 470 mm . All elements are enclosed...
Index: CRL-13518
Index: CRL-13518
Unavailable
Regular price €1,859.30 Price €1,859.30