- EOL
|
Attention! The sale of the product has been completed. Check others in thiscategory. |
Description
The Zhaoxin 868D has an LED display that can read the temperature for hot air. The mainsail and air temperatures are adjusted by means of buttons and knobs.
The device hasa sensor in the cradle, thanks to which, after putting the flask away, the station cools down the heating element in 3 to 8 minutes, and then automatically switches the device into low power mode(so-called standby mode). This mode saves energy, prolongs the heater's life and increases safety. The station remembers the last set temperature.
Stable and efficient air exhaust is carried out bya fan located in the flask. It is driven by a brushless motor, which ensures high durability and reliability of operation.
Specification
- Power supply voltage: 230 V / 50 Hz (mains)
- Power:700 W
- The station is controlled by a microcontroller, which ensures high operational stability
- The device has astandby mode
- Temperature stabilization of the cave
- Equipped with an ergonomic housing
- ESD security
Hotair soldering iron
- Hot air temperature controlfrom 100 °C to 480 °C
- Temperature stability +/-1 °C
- LED display
- Setting the temperature using the dial and buttons
- Infinitely variableairblast controlwith the rotary knob
- Air flow rateup to 120 litres/minute
- The air exhaust is provided by a fan in the flask
- The fan is driven bya brushless motor
Grotto Soldering iron
- Temperature control of the mainsailfrom 200 °C to 480 °C
- Power:60 W
- Temperature stability +/- 1 °C
- Temperature stability of the mainsail
Included:
- Soldering station WEP 868D
- Hotair flask tray
- A set of nozzles:
- round nozzle with 4.5 mm diameter
- 7.5 mm diameter round nozzle
- 11.2 mm diameter round nozzle
- Main flask holder with cleaning sponge
- Mainsail with mainsail T-B
|
First start-up
|
