15V 2A 1502DD power supply

Laboratory power supply Zhaoxin LED PXN-1505D 15V 5A

Index: ZAS-00910

The PXN-1505 laboratory (service) power supply unit is characterized by smooth voltage regulation in the range from 0 to 15V (two setting potentiometers - coarse and accurate).

€45.35
€36.87 tax excl.

Unavailable
Discontinued product
30-day returns
Manufacturer: Zhaoxin

Attention!

The sale of the product has been completed. Check other devices in this category.

Description

The stabilized laboratory power supply PXN-1503D (15V 5A) has stepless voltage regulation and current protection (after exceeding a given load the power supply is cut off).
The device is used, among others, in electronic services, laboratories.

Specification:

  • Stepless voltage regulation
  • Current limitation
  • Short-circuit protection
  • Reading output voltage and current on the LED display
  • Display accuracy 0.1V and 0.01 A current
  • Power supply voltage: 220VAC +/-10% 50/60Hz
  • Output voltage 0÷15 V
  • Output current 0÷5 A
  • Operating temperature: -10°C to 40°C
  • LED display 3 1/2 digit
  • Accuracy of voltage indication +/-(1%+1c)
  • Stability of voltage
  • Power source stability from 0.01% +2mV
  • Interferences from 1mVrms

  • Display accuracy +1% +1 digit
  • External dimensions: 200x127x155mm


What's in the set:

  • Laboratory / service power supply PXN-1505D
  • Power Cable
  • Operating instructions

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

Breadboard - 270 holes

Breadboard  is used for creating and testing electronic circuits without the need fo soldering. The version with 270 fields, size 82.5 x 45 mm.
Index: PLY-00057
Index: PLY-00057
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.84 Price €1.84

AVR microcontroller - ATmega8A-PU DIP

Microcontroller from Atmel AVR 28-leg DIP case. Voltage supply range from 2.7 V to 5.5 V, frequency up to 16 MHz, has 8 KB Flash, 1 KB RAM, 512 B of EEPROM.
Index: UCC-00078
Index: UCC-00078
Czas oczekiwania ok. 10-30 dni
Regular price €1.60 Price €1.60

Breadboard - 2420 holes with power supply connectors

Breadboard is used to create and test electronic circuits without the need for soldering. This version has p ins, which allow for connecting and disconnecting the power in a...
Index: PLY-00606
Index: PLY-00606
Czas oczekiwania: ok. 10-30 dni
Regular price €16.05 Price €16.05

Breadboard - 3220 holes with power supply connectors

Breadboard has pins that allow to connect and disconnect the power supply in a simple and quick way.
Index: PLY-00609
Index: PLY-00609
Czas oczekiwania: ok. 10-30 dni
Regular price €15.35 Price €15.35

Soldering station WEP 937D - 40W

Grotto WEP soldering station 937D with power of 40W and adjustable temperature from 200 °C to 480 °C. It has a LED display which shows the set temperature of the soldering tip.
Index: LUT-00658
Index: LUT-00658
In stock, shipping 24 hours!
(Check quantity)
Regular price €26.26 Price €26.26

Customers who bought this product also bought:

Soldering stand ZD10D - handle with magnifying glass - Vorel 73500

Mounting bracket with magnifying glass 2.0 diopter and two grippers. The product is perfect for working with small electronics, e.g. while soldering or joining elements....
Index: NSZ-00913
Index: NSZ-00913
Available, 24h shipping!
(Check quantity)
Regular price €3.47 Price €3.47

Stand for a soldering iron - Vorel 79386

Universal stand for soldering irons, suitable for most of resistance soldering irons. The set also includes a sponge.
Index: NSZ-00673
Index: NSZ-00673
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.98 Price €1.98

Rosin 40g

Flux with the addition of activators to facilitate soldering.
Index: NSZ-00169
Index: NSZ-00169
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.65 Price €0.65

Sponge for cleaning soldering tips - square - 5pcs.

Soldering iron square-shaped main blade cleaning sponge with a side of about 60 mm.
Index: LUT-00639
Index: LUT-00639
Available, 24h shipping!
(Check quantity)
Regular price €2.07 Price €2.07

Connecting cables female-male 20cm - 40pcs

Set includes 40 PCs of multi-colored connecting cables with a length of 20 cm, on one side ended with a female  connector, on the other, with a male connector.
Index: KAB-01067
Index: KAB-01067
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.38 Price €1.38

Connecting cables female-female 20cm - 40pcs.

Set includes 40 PCs of multi-colored connection cables with a length of 20 cm ended from both sides with the female connector on goldpin.
Index: KAB-01021
Index: KAB-01021
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.38 Price €1.38

Male Headers 2x40 raster 2,54mm angle

Goldpin male 2x40 strap, pitch is 2.54 mm.
Index: KAB-00194
Index: KAB-00194
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.35 Price €0.35

Set of heat-shrink tubes 35pcs - length 90mm

Set of 35 heat-shrink tubing with different diameters, in different colors.
Index: ETN-01016
Index: ETN-01016
Czas oczekiwania: ok. 10-30 dni
Regular price €1.39 Price €1.39

LED RGB 5mm common anode

LED RGB 5 mm with common anode. Lens transparent.
Index: LED-00543
Index: LED-00543
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.21 Price €0.21

Breadboard - 400 holes transparent

Breadboard is used for creating and testing electronic circuits without soldering. Version with 400 cells, the size of 82.5 x 53 mm, with a transparent body. Stripes denoting...
Index: PLY-01143
Index: PLY-01143
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.53 Price €2.53

Male Headers 1x40 raster 2,54mm angle

Goldpin male 1x40 strap, pitch is 2.54 mm.
Index: KAB-00205
Index: KAB-00205
Czas oczekiwania ok. 10-30 dni
Regular price €0.16 Price €0.16

Infrared receiver TSOP4840 - 40 kHz

IR receiver TSOP4840 . It is operating at a frequency of 40 kHz.
Index: SES-00782
Index: SES-00782
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.05 Price €1.05

Products from the same category

MakeBlock 84721 - solid 4x6mm connector - 2pcs

Solid connector often used in positive and negative rotation, or in gear that require high sensitivity. You can connect a 6 mm screw or T6 and a stepper motor in a 3D printer.
Index: TRB-10379
Index: TRB-10379
Unavailable
Regular price €19.77 Price €19.77

USB 3.0 extension for cameras - ArduCam B0111

Overlay for ArduCam cameras enables connecting cameras via USB 3.0 interface. The new version of the overlay offers higher performance and greater possibilities than the...
Index: ACM-17657
Index: ACM-17657
Unavailable
Regular price €117.19 Price €117.19

MakeBlock 60721 - beam 0412-188 - blue - 4pcs

Beam 0412-188  is a commonly used mechanical part of the MakeBlock platform. There are mounting holes on the surface allowing you to easily combine it with other designs. Set...
Index: TRB-10447
Index: TRB-10447
Unavailable
Regular price €7.67 Price €7.67

Glass for 3D printer - 214 x 214mm

An accessory for 3D printer in a form of a glass with dimensions of 214 x 214 mm and thickness of 4 mm. The glass is compatible with Prusa i3 MK3 printer. The glass comes...
Index: XDS-17975
Index: XDS-17975
Unavailable
Regular price €7.84 Price €7.84

MakeBlock 83044 - 378T Timing Belt - pair

Set includes two pieces of neoprene timing belt 378T, in MXL format.
Index: TRB-10503
Index: TRB-10503
Unavailable
Regular price €11.62 Price €11.62

MakeBlock 83051 - Timing Belt 3m

Neoprene timing belt is ideal for 3D printers, sliders, cameras or other linear motion systems. Belt length is 3 m.
Index: TRB-10508
Index: TRB-10508
Unavailable
Regular price €13.93 Price €13.93

MakeBlock 85450 - shaft D 8x96mm - 2pcs

Threaded D shaft with 8 mm diameter and 96 mm of length. Set includes 2 shafts.
Index: TRB-10547
Index: TRB-10547
Unavailable
Regular price €6.97 Price €6.97

DC Motor - Tamiya 980112M Mabuchi FA-130

Small metal motor reaching 12,300 rpm with a supply voltage of 3 V.
Index: PLL-00138
Index: PLL-00138
Unavailable
Regular price €1.98 Price €1.98

MakeBlock 86008 - slider 496 - blue - 4pcs

Slider 496 mm made of extruded, anodized 6061 aluminum with high strength and resistance to bending.
Index: TRB-10549
Index: TRB-10549
Unavailable
Regular price €30.00 Price €30.00

Vibration Motor Z4FC1B1301781

Metal vibrating motor with a cover, powered from 2.6 to 3.6 V, with current consumption of approx. 110 mA. Dimensions 12 x 5 mm.
Index: UCC-01774
Index: UCC-01774
Unavailable
Regular price €3.47 Price €3.47

Carbon and monoxide sensor KIDDE 7DCO

A sensor that recognizes the concentration of carbon monoxide (CO) in the air. Powered by three AA batteries. Used for warning  with an audio signal before  harmful CO...
Index: HUR-10616
Index: HUR-10616
Unavailable
Regular price €23.72 Price €23.72

Smart controller Reprap 3D Ramps 1.4 LCD 2004

Control panel with LCD display and SD card slot for 3D RepRap printers. Also included are cables and adapter for connection to the Ramps 1.4 controller.
Index: MOD-02661
Index: MOD-02661
Unavailable
Regular price €19.77 Price €19.77