- Sale
- Sale
- Sale
- Sale
LED lighting - Strona 3
Loading...
DFRobot Matrix LED RGB 32x16 - 512 diodes
The matrix consists of 512 RGB LEDs arranged in 32 rows and 16 columns. For operation of the module, you must use 13 pins of the microcontroller. The matrix can be connected in...
Index: DFR-12264
Index: DFR-12264
Power supply for LED Akyga 11-15V / 8.3A / 100W
100 W power supply designed to supply lighting based on LED technology, e.g. tapes, bulbs, panels, RGB controllers and other DC-powered devices from 11 V to 15 V. The voltage...
Index: RCO-12861
Index: RCO-12861
Grove RGB LED Stick - LED RGB 10 x WS2813 Mini 3535
The panel consists of 10 individually addressed RGB LEDs WS2813 Mini-3535 with built-in control unit. LEDs located on the panel are controlled with just one signal pin.
Index: SEE-13662
Index: SEE-13662
Grove - LED RGB module - 20 diodes WS2813 - Seeedstudio 104020170
The module is equipped with 20 RGB WS2813 LEDs . On the board there is a Grove connector for simple connection to the base plate. Each of the LEDs is individually addressed ,...
Index: SEE-15554
Index: SEE-15554
Power supply GLP GPV-35-24 for LED strip 24V/1,5A/36W - waterproof
GPV-35-24 power supply for LED lighting with 24 V output voltage and 36 W. The power supply housing is waterproof. Built-in electronic protections protect the secondary...
Index: WAK-15672
Index: WAK-15672
Blebox PixelBox - adressable LED RGB driver WiFi - Android / iOS application
Ready-made module to control addressed LED strips based on WS2812 or WS2811. Controlled via WiFi using the wBox application for Android or iOS devices, so you can control...
Index: BOX-16210
Index: BOX-16210
Helping hand - Holder with magnifying glass and LED backlight - ZD10M
Mounting handle with a magnifying glass x2, clips, a spring for a soldering iron, a spot for the tip cleaner and LED backlight.
Index: NSZ-01527
Index: NSZ-01527
„Power supply GPV-60-12 for LED strip - 12V/5A/60W - waterproof IP67
Waterproof, stable power supply for powering LED strips. Supply voltage: 100 V to 240 V. Output voltage: 12 VDC. Output current: 5 A. Connection: loose wire with removed...
Index: ZAS-08681
Index: ZAS-08681
RGB LED strip WS2813 - digital, addressed - IP65 60LED/m, 18W/m, 5V - 5m
Individually addressed RGB LEDs placed on a 5 m panel with a density of 60 LEDs per meter. Each pixel can emit a color from 24-bit palette.
Index: LED-08734
Index: LED-08734
Power supply Akyga 10.5-14V / 4.2A / 50W
50 W power supply designed to supply lighting based on LED technology, e.g. tapes, bulbs, panels, RGB controllers and other DC-powered devices from 10.5 V to 14 V. The voltage...
Index: RCO-12859
Index: RCO-12859
Power supply for LED Akyga 11-15V / 6.25A / 75W
75 W power supply designed to supply lighting based on LED technology, e.g. tapes, bulbs, panels, RGB controllers and other DC-powered devices from 11 V to 15 V. The voltage...
Index: RCO-12860
Index: RCO-12860
- Sale
Module with LED RGB diode - Iduino SE010
Iduino module with LED diode, emitting light in the colors RGB. It has a 4-pin connector with adjustable input PWM. It can be controlled via the Arduino.
Index: OST-14294
Index: OST-14294
Grove - LED Strip Driver v2.0 - LED driver for Arduino - Seeedstudio 105020002
A module that allows you to control the brightness of monochrome LED strip with LED RGB brightness and color. It has 2-pin connectors, power supply screw connector, 4-pin screw...
Index: SEE-04443
Index: SEE-04443
Power supply for LED strips - 12V / 16,7A / 200W
Stable, switched-mode, industrial power supply for powering LED strips. Voltage: from 110 V to 220 V. Output voltage: 12 VDC. Output current:16,7 A. Equipped with a terminal...
Index: ZAS-09651
Index: ZAS-09651
Grove - LED RGB module - 15 diodes WS2813 - Seeedstudio 104020172
Module with 15 WS2813 RGB LEDs arranged in one row. There is a Grove connector on the board for easy connection of the module to the base plate. Each LED is individually...
Index: SEE-15556
Index: SEE-15556
RGBCW LED strip SK6812 - digital, addressable - IP30 60 LED/m, 5V - 5m
RGB LED strip equipped with a chip SK6812, allowing for individual control of each diode. In addition to RGB colours, it can also emit a cold white colour. The density...
Index: DNG-18341
Index: DNG-18341
BleBox ReflectiveSwitch - reflective LED driver 12-24V / 4A
Mini reflective switch used with LED strips. Works with voltage from 12V to 24V and electric current up to 4A. It turns on the light inside the furniture (e.g. wardrobe) and...
Index: BOX-08901
Index: BOX-08901
- Sale
BleBox TwilightSwitch - twilight LED switch 12-24V / 4A
Mini twilight switch used with LED strips. Works with voltage from 12V to 24V and electric current up to 4A. It turns the light on at dusk and off when it gets bright. No...
Index: BOX-08902
Index: BOX-08902
- Sale
Waterproof headlamp equipped with a diode COB LED 3 W with brightness of luminous flux 150 LM. The flashlight has three modes: 100%, 25% and flashing.
Index: NSZ-09073
Index: NSZ-09073
- Sale
RGB LED Matrix 8 x 8 with a control unit, designed to display simple images and patterns of 64 pixels LEDs, and 255 colors for each pixel, which gives almost unlimited...
Index: SEE-13665
Index: SEE-13665
Power supply GLP GPV-60-24 for LED strip 24V / 2,5A / 60W - waterproof
The GLP GPV-60-24 Switch Mode Power Supply in an IP67 enclosure has been designed for LED lighting in high dust and humidity environments. The output voltage of the power...
Index: WAK-15673
Index: WAK-15673
BleBox wLightBox Pro - LED RGBW WiFi driver - Android / iOS application
A small WiFi module with an additional long-range antenna, allows you to control a 12 V or 24 V RGBW LED strip with a maximum current consumption of 12 A , four...
Index: BOX-17721
Index: BOX-17721
NeoPixel Ring - LED RGB ring 12xWS2812 - Adafruit 1643
The ring consists of 12 individually addressed RGB LEDs 5050 with integrated control unit. Module needs one microcontroller output. Outer circle diameter is 37 mm.
Index: ADA-02944
Index: ADA-02944
Power supply GPV-60-5 for LED strip - 5V / 8A / 40W - waterproof
Waterproof, stable power supply for powering LED strips. Supply voltage: 100 V to 240 V. Output voltage: 5 V DC. Output current: 8 A. Connector: a loose wire with removed...
Index: ZAS-08687
Index: ZAS-08687
See also
- Conductive paint
- 24v relays
- DJI Phantom drones
- Zortrax Filaments
- Outdoor LED lighting
- Siemens LOGO!
- Esperanza compressed air
- 4-core cables
- Anet 3D printers
- Wireless mice
- DJI Mavic drones
- Syma drones
- Power supplies 12v 10a
- Fluorescent filament
- DJI Inspire drones
- 2-core cables
- Magnetic balls
- Compressed air to clean the keyboard
- Encoders
- Car fuses
- Membrane keyboards
- RPi Wi-Fi cards
- Tablets
- Intel modules & kits
- Hexbug toys
- PLA Pro filaments
- DJI Mavic drones - drones and accessories
- Raspberry Pi CM3
- Banana Pi
- 2D printers and pens
- Photo traps
- Odroid cases
- Intel starter kits
- Keyboards for Arduino
- Android Box Smart TV
- Resistors SMD 1206
- Smart ABS filaments
- Intel expansions & hats
- Headphones
- GPS trackers
- String bags (zip bags)
- Dobot 3D printers
- Odroid accessories
- Books about Raspberry Pi
- Chargers
- Vacuum forming
- STM32 books
- Intel - module accessories
- Photon
- BCN3D 3D printers
- Odroid
- BeagleBone power supply
- AGM batteries
- Car handles
- Refill filaments
- Electrolytic capacitors SMD
- Alarm sirens
- Tantalum capacitors SMD
- Flsun 3D printers
- Sensors and alarms
- Flexible filaments
- Khadas VIM
- Arylic sound modules
- Laminators
- Zortrax 3D printers
- Doorbells and peepholes
- Motor capacitors
- RC cars and models
- Linear actuators
- Trilab 3D printers
- Goofoo 3D printers
- Bluetooth Speakers
- Control equipment
- Urbicum 3D printers
- Spare parts
- Webcams
- TinkerGen
- Mycusini 3D printers
- Weight meters
- ATMAT 3D printers
- Raspberry Pi 2B+
- Makeblock 3D printers
- DJI educational robots
- Fingerbot - home automation
- MakerPi 3D printers
- Transport cases
- Silk Filaments
- Orange Pi
- Sparky
- Air conditioning and heating
- Abilix Krypton
- 3D printer Artillery
- SkriWare - educational robots
- Gas soldering irons
- Air purifiers
- LittleBits
- Exta Free - sensors and modules
- USB Numato Lab GPIO drivers
- Rock Pi
- Spresense Sony
- Netronix RFID modules
- Clementoni
- AST lighting drivers
- CubieBoard
- WowWee
- Coolseer home automation
- AMK - automation and control
- Smartwatches