- EOL
|
Attention! The product has been discontinued. Check others products incategory. |
Description
3D printer Anet E12 is designed to print features with sizes400 x 300 x 300 mm. Size594 x 486 mm x 500mm. the Printer has an interface in English. The set consists of elements for self-Assembly.
The subject of the sale is the original printer by 3D Anet.
The printer has a nozzle with a diameter of 0.4 mm and with active cooling fan. It supports popular filaments ABS, PLA, etc. with a diameter of 1.75 mm.
Printing field and display
3D printer Anet E10has the ability to print elements with dimensions of 400 x 300 x 300 mm. Large, easy to read display LCD12864 allows you to easily configure the print settings.
Easy to read display and large printing field make this printer 3D Anet E12 very convenient to use.
Applied elements
The device was equipped with a large, easy to use LCD12864 display and metal nozzle of 0.4 mm in the form of the letter "I". Stepper motor ensures long life and better heat dissipation. Motherboard, power supply and LCD display are housed in a single control module. Applied rails provide more stable and accurate printing. The printer frame is made of aluminum and provides high stability. The wing screws allow for precise adjustment of the desktop level. Thanks to special overlays on the table top, there is no need to use a spatula for peeling off the printed elements.
Structural elements of the printer Anet E12.
| Attention! Before connecting the device it is necessary to assemble it in accordance with the manufacturer's instructions |
| Technical specification | |
|---|---|
| Power supply: |
from 110 V-220 V (AC - AC) |
| Full power: | 300 In |
| Display: | LCD12864 |
| Print speed: | from 40 mm/sec to 120 mm/sec |
| Preinting precision: | ± 0.1 mm |
| Print thickness: | from 0.1 mm to 0.4 mm |
| Nozzle diameter: |
standard: 0.4 mm alternative: 0.2 mm, 0.3 mm |
| Supported filaments: |
PLA, ABS, HIPS, etc. |
| Diameter of filament: | 1.75 mm |
| Mode of operation: | Online or from the SD card |
| File format: | STL, obj, jpg |
| Software: | Cura |
| Print format | Gco, Gcode |
| Print size: |
400 x 300 x 300 mm |
| Nozzle temperature: | max. 250 °C |
| Temperature of desktop: | max. 100 °C |
| The dimensions of the printer: | 594 x 500 x 486 mm |
| Weight: | 8,8 kg |
Included
- The printer (a set of elements for self-assembly)
- 2 x white PLA filament 30 g / 1.75 mm
Useful links |
