- EOL
|
Attention! The product has been discontinued. Check other products incategory. |
Description
Cap, type Hat for Raspberry, version 4B, 3B+, 3B, 2B, A+, B, Zero with high-quality interface S/PDIF and optical connector. Used in device, system has a resolution of 24-bits, runs at a frequency of 192 kHz. In addition, it has two oscillators: 44.1 kHz and 48 kHz, gilded connector RCA, output I2S and the possibility to add BNC connectors.
| The device works with the Raspberry Pi 3 after turning off the Bluetooth module, the details inthe statement from the manufacturer of HiFiBerry about the compatibility with Raspberry Pi 3. |
Key features
- High quality, built-in connector S/PDIF and optical slot.
- The device works with a resolution of 24 bit and with a speed up to 192 kHz.
- Board has special connectors for the GPIO of the Raspberry Pi, to connect it, you don't need any extra wires or adapters. It works with minicomputer in version 4B, 3B+, 3B, 2B, A+, B, Zero.
- The device is powered with a Raspberry Pi, it does not require additional power supply.
- The device works withthe Raspberry in version 4B, 3B+, 3B, 2B, A+, B, Zero.
- The weight of the tile is 20 g and dimensions are 55 x 65 x 15 mm.
The Version Digi+ Pro
Additional features are available in the HiFiberry Digi+ Pro:
- 2 separate oscillators, 44.1 kHz and 48 kHz, help to achieve the optimal clock frequency for each sampling
- Gilded RCA tips
- Output I2S (requires soldering connectors)
- The possibility to power the circuits 5 V and 3.3 V from an external power source (requires soldering connectors)
- The possibility to add BNC connector (requires soldering connectors)
- Access to the GPIO connectors
- Galvanic isolation
Introduction of the modules from the HiFiberry series.
Connecting
HiFiBerry installation is very simple, just put the memory card into the card reader of the computer, then runthe configuration programand select the appropriate board and the operating system. The app will automatically install the operating system with appropriate driver. After passing the card to Raspberry Pi, HiFiberry board will already be properly configured.
Included are the required distances for installation.
Description of the installation for a finished operating system you can find atthis address, the list of supported systems is available onthe website of the manufacturer.
The configuration program HiFiBerryis very simple and intuitive.
|
Online, you can find the systemMax2Playfor HiFiBerry which allows you to create configurations of multiroom, using several models of the Raspberry. More information on blogMalinowePi. |
Video
Film facilitating the choice of a suitable version of the HiFiBerry.
Useful links
|
